Products


Complete kit $72.48
Options
Quantity

Werkstat Acrylic Jett Kit

This excellent value for money kit includes everything you need to achieve the Werkstat acrylic finish on your car, and works best on lighter colours and metallic/pearlescent finishes. Werkstat Prime Acrylic is a light finishing polish that lays down a tough initial coat of acrylic protection whilst deep cleansing the paint; you should use it once every six months after claying. Werkstat Acrylic Jett Trigger is a pure spray sealant that should be used to add more gloss and protection every 6-8 weeks; the more layers you build up, the better the finish will get, in terms of both wetness and durability. Werkstat Acrylic Glos is a quick detailing spray and can be used to help boost gloss, lubricate when drying off after washing and loosen the residues of Werkstat Prime Acrylic and Werkstat Acrylic Jett Trigger should you find them hard to remove.

The kit includes...

1-500ml Werkstat Prime Acrylic
1-500ml Werkstat Acrylic Jett Trigger
1-500ml Werkstat Acrylic Glos
1-BF Ultimate applicator pad
3-Werkstat Plush towels

Purchased seperately, these items would cost $80.53. You save $8.05

Thank you for visiting Autowerkes Exclusive. Due to personal reasons, I have decided to close the store down until further notice. All orders that have been placed will be filled and shipped as per usual.

I appreciate all the people who have supported the store since it opened and look forward to serving you again in the future.

Ken

PRODUCTS

Raceglaze ph Neutral Snow Foam

We may not be first to market with this type of product and we've tried a few out and taken note of what the professionals say. So, we've made our own! Brand new in November 2010, just when you don't want to dip your hands in a bucket of freezing water, this very clever formulation is highly concentrated (offering twice the diluation ratio of some other products) and is PH neutral - did we say that again? To soften bugs, mud and salt deposits and road film, while not removing wax is the key and for this you need a non-TFR based foam. We also wanted a really thick, dense clingy foam of small bubbles - big bubbles won't put product in contact with the surface, and it to only slowly fall off the vehicle. We think we've cracked that too. Size isn't everything - a big 5 litre bottle may look impressive but there's a lot of water in there to bulk it up. We made ours thick and concentrated so you don't have to store 2 gallons at a time! And this means we can ship it anywhere as its also safe and economical to do so. For enthusiast users with 1 or 2 cars, your 1 litre attachment bottle will do 3-4 cars before you need to add more concentrate. 500ml of concentrate will foam around 30-40 cars! You do not need to buy 5 litres! But we do have a 2.5 litre size for the pros - coming soon!

• pH neutral

• Concentrated 20:1 dilution ratio

• Creates super dense clinging foam to soften surface dirt

• Runs off vehicle, visibly taking dirt with it

• Biodegradable, pH neutral

• 500ml concentrate makes 10 litres, sufficient for c.30-40 cars

Ken's Note - Although this product was designed for use with a pressure washer and foam lance attachment, we have had good success using with the Gilmour style foam guns as well.

LEARN MORE