Products


32oz $32.99
Options
Quantity

Carpro IronX 32oz

CarPro Iron X is an intensive fallout remover suitable for use on all exterior automotive surfaces (with the exception of anything made from, or coated with, chrome). Fallout typically comprises inorganic particulates derived from industrial and commercial activities, but also encompasses brake dust, railway dust and exhaust soot. Fallout can bond to exterior automotive surfaces both physically (by charge attraction) and chemically (by electrolysis), and typically contains ferrous compounds and particulates. As such contaminants gradually accumulate on bodywork, surface roughness gradually increases to the point where it can be detected by touch, whilst the reflectivity of the finish and the ability of the paint to sheet water properly gradually diminishes. Furthermore, as such contaminants slowly oxidise and corrode, etching and discolouration of underlying painted surfaces can occur and caustic compounds can leach into the paint system itself. Because inorganic contaminants are mostly delivered through the air, it does not matter where you live or where you leave the car; it is susceptible to contamination everywhere and anywhere, and all times of the year too.

 

If you are familiar with detailing clay you will know that it is designed to remove bonded surface contaminants, but what you may not be aware of is that it cannot remove ferrous compounds and sintered iron particulates that have migrated into the uppermost layer of paint (automotive paint is porous and thus can absorb contaminants in both solid and liquid forms). Being liquid-based, CarPro Iron X is able to access the pore structure of paint systems and remove both surface and sub-surface contamination quickly and efficiently. Once applied, it bonds to ferrous compounds and sintered iron particulates and reduces them to a water soluble complex which can then be easily rinsed away. This process can be seen to be working with the naked eye, as the initially transparent solution gradually turns purple as it progressively acquires freshly dissolved iron species. Although CarPro Iron X is water-based and pH balanced, it is strong enough to bleach clothing and should therefore be used with care.

Thank you for visiting Autowerkes Exclusive. Due to personal reasons, I have decided to close the store down until further notice. All orders that have been placed will be filled and shipped as per usual.

I appreciate all the people who have supported the store since it opened and look forward to serving you again in the future.

Ken

RaceGlaze Deep Pile Natural Sheepskin Washmitt

Our soft-to-the-touch Sheepskin Wash Mitt will pamper your car's finish. The long, natural fibers hold more soapy water and allow loosened grit to migrate away from the surface being washed. This reduces washing swirl marks. Used dry, natural sheepskin is a great dust mitt. Wipe away dust on the dash and console and use it around the home on shelves, stereo equipment and computer screens. Please note: Rinse out after use with cold water and allow to air dry out of direct sunlight. Do not machine wash or machine dry. Natural sheepskin mitts will not last as long as synthetic mitts but are much gentler to the paint's finish. Made from the finest deep pile Australian sheepskin, this is the Rolls Royce of mitts, a totally natural product which will last for years. Its luxurious soft, deep pile makes washing and polishing a pleasure. Smells and feels beautiful. An exclusive product. Colours vary

Kens note - I have been using these mitts from RaceGlaze for over 9 months now
and have to say I am very impressed. At my detailing shop, these mitts will see a years worth of carwashes in a month. The mitts I use daily still look brand new. The nice thing is that they don't fall apart after a few months like most sheepskin mitts. Very highly recommended. 

LEARN MORE