Products


ea $12.50
Options
Quantity

Grit Guards

 If you own a show car, collector car, exotic, hot rod or any vehicle with black, red or dark color paint, this is probably the best ten bucks you can spend. I can't tell you how many phone calls and e-mails we get from people washing their vehicle and putting swirls in the paint. Washing swirls are not directly caused by the sponge, wash mitt or wash brush you're using. Swirls are caused by grit (particles of sand) suspended in the wash water. Trapped between your wash mitt and the car's finish, this grit acts like sandpaper on your car's clear coat finish.

    Reduce or eliminate these swirls with the Grit Guard® Insert. This simple plastic grid sets in the bottom of any 12 inch diameter bucket or pail (I like it best with a 5-gallon pail).  As your sponge, wash mitt or wash brush is rubbed against the Grit Guard Insert, gravity causes grit and sand particles to settle  to the bottom of the pail.

    Your wash water stays "scratch-free" clean! When you're done washing, you'll be amazed at how much grit and grime has settled in the bottom of your wash bucket.

Thank you for visiting Autowerkes Exclusive. Due to personal reasons, I have decided to close the store down until further notice. All orders that have been placed will be filled and shipped as per usual.

I appreciate all the people who have supported the store since it opened and look forward to serving you again in the future.

Ken

PRODUCTS

Raceglaze ph Neutral Snow Foam

We may not be first to market with this type of product and we've tried a few out and taken note of what the professionals say. So, we've made our own! Brand new in November 2010, just when you don't want to dip your hands in a bucket of freezing water, this very clever formulation is highly concentrated (offering twice the diluation ratio of some other products) and is PH neutral - did we say that again? To soften bugs, mud and salt deposits and road film, while not removing wax is the key and for this you need a non-TFR based foam. We also wanted a really thick, dense clingy foam of small bubbles - big bubbles won't put product in contact with the surface, and it to only slowly fall off the vehicle. We think we've cracked that too. Size isn't everything - a big 5 litre bottle may look impressive but there's a lot of water in there to bulk it up. We made ours thick and concentrated so you don't have to store 2 gallons at a time! And this means we can ship it anywhere as its also safe and economical to do so. For enthusiast users with 1 or 2 cars, your 1 litre attachment bottle will do 3-4 cars before you need to add more concentrate. 500ml of concentrate will foam around 30-40 cars! You do not need to buy 5 litres! But we do have a 2.5 litre size for the pros - coming soon!

• pH neutral

• Concentrated 20:1 dilution ratio

• Creates super dense clinging foam to soften surface dirt

• Runs off vehicle, visibly taking dirt with it

• Biodegradable, pH neutral

• 500ml concentrate makes 10 litres, sufficient for c.30-40 cars

Ken's Note - Although this product was designed for use with a pressure washer and foam lance attachment, we have had good success using with the Gilmour style foam guns as well.

LEARN MORE